€59,900 | | |
Status: | Available |
Tax Status: | Tax Not Paid |
Tax Information: | UK VAT paid |
Location: |
Nieuwpoort West-Vlaanderen Belgium [View Map] |
Website: | https://apolloduck.net/707666 |
Dufour Gib'Sea 37. Owners version - 2 double berth cabins, spacious galley and larger cockpit locker. Never been used as a charter boat.
Crafted by J&J Design, built by Dufour Yachts in 2002, launched only in 2004.
This is a great family Cruiser with very comfortable accommodation, good performance, easily sailed short-handed and is under the 11.1m marina berthing fees band!
This yacht has been lovingly improved and is in an immaculate condition. Wealth of equipment was replaced and added over the last years, including upgraded new Selden foresail furling system, Raymarine electronics, Vectran mainsail and genoa, cruising chute, standing and running rigging, new acrylics for all portlights and hatches, heads and holding tank, sprayhood, cockpit tent....the list goes on.
The yacht is currently stored ashore in Nieuwpoort so hull/keel survey can be carried out in order to save on lifting fees.
Vessel is registered on Part 1 of the UK Ship Register, has no outstanding finance. VAT is not applicable for UK customers as the yacht has UK VAT paid status (VAT payment certificate is available).
Please contact regarding the price for sale in UK which includes a delivery to Dover.
Delivery to other UK south or east coast locations can be arranged for an additional fee, subject to weather conditions.
Please contact for more details.
Sale due to an unfortunate change in circumstances.
Make: Dufour
Model: Gib'Sea 37
Hull Length: 10.97 m (36 ft)
Draft: 1.68 m (5 ft 6 in)
Tax Status: tax paid (VAT certificate available)
Water tanks: 430 L (180 L & 250 L)
Fuel tank: 160 L
Holding tank: 35 L
Vessel type: | Masthead rigged sloop |
Designer: | J&J Design |
Builder: | Dufour |
Make: | Gib Sea |
Model: | 37 |
Constructed: | 2002 |
Registration: | Part 1 |
Registry: | UK Ship Register |
Berths: | 7 |
No. of engines: | 1 |
Engine model: | Yanmar 3GM30F |
Engine power: | 29 |
Engine hours: | 1104 |
Fuel type: | Diesel |
Drive type: | Shaft drive |
Length over all: | 36' |
Length at waterline: | 9.7m |
Beam: | 3.7m |
Maximum draft: | 1.68m |
Bridge clearance: | 15m |
Hull material: | Glass Fibre |
Hull colour: | White |
Keel type: | Bulb Keel |
Displacement: | 6210 kg |
Fuel capacity: | 160 Litres |
Water capacity: | 430 Litres |
Holding tank capacity: | 35 Litres |
Cabins: 2
Double berths: 2
Heads: 1
INTERIOR:
• sleeps up to 7 people in one single and three double berths
• Webasto diesel heating system with silencers
Saloon:
• Weems & Plath clock/barometer/hygrometer/thermometer
• 12V Sharp LED TV with built-in DVD player
• U-shaped seating to Starboard
• bench seating and chart table to Port
• good stowage behind and under saloon seats
• folding saloon table with storage compartment - converts to a double berth
• curtains and pleated blinds to portlights and hatches
• 2x hanging lockers and shelving to both sides
• Teak grabrails to both sides
• 3x deckhead LED lights
• 2x reading LED lights
• 2x 240V power sockets
• 2x 12V power sockets
Galley:
• twin bowl stainless steels sink with hot and cold mixer tap
• Frigoboat Frigomatic top opening fridge
• ENO gimballed 2 burner gas cooker and oven
• gas regulator, fittings and hose – replaced March 2018
• opening hatch over stern
• opening portlight above cooker
• 2x deckhead LED lights
• 1x cooker light
• 2x 240V power sockets
Forward Cabin:
• double V-berth with stowage lockers and transducers below
• deck hatch with blind
• 2x hanging lockers and shelving to both sides
• single seat with storage compartment
• 1x deckhead LED light
• 2x reading LED lights
• 1x 240V power socket
Starboard Quarter Cabin:
• large double berth
• opening hatch and portlights
• 1x hanging locker with shelving
• 1x deckhead LED light
• 2x reading LED lights
• 1x 240V power socket
Heads:
• Jabsco manual toilet
• 35 litre holding tank
• electric shower drain pump
• washbasin with retractable shower head with hot and cold mixer
Boat type: masthead rigged sloop
Hull material: fibreglass – copper coated
Construction:The vessel is constructed from multi mat GRP and of a solid construction below the waterline, finished in polished gelcoat on the exterior surfaces. The vessel’s hull is hand laid-up in a mould and a foam core material is used above the waterline for added strength and insulation. Around the keel area Twaron woven with glass fibre is used for further strengthening. A separately moulded inner liner is lowered into the hull and bonded to the hull using structural adhesives at contact points and direct lamination in areas around the keel securing where bays are cut-out. The inner moulding and deck are both injection moulded and, in the case of the deck, a balsa type core is used around high load areas. The hull - antifouled with a CopperCoat. Coachroof, foredeck and side decks are moulded with very efficient non-skid finish. Teak decking is laid in the cockpit on the seats and sole. Pulpit with dolphin nose fitting with double in-line rollers and stainless steel stemhead fitting. GRP semi-balanced spade hung rudder.
Keel: cast iron with bulbed foot
LOA: 10.98 m (36 ft 1 in)
LWL: 9.7 m (31 ft 10 in)
Beam: 3.7 m (12 ft 2 in)
Air draft: 15 m (49 ft 4 in)
Ballast: 1,800 kg (3978 lbs)
Displacement (lightship): 6,210 kg (13702 lbs)
Cruising speed: 6 kn
Max speed: 7.5 kn
POWER AND CHARGING:
• 12V DC circuit
• 220-240V shore power
• HI-TEC Tecsup 200-300W built-in switch mode 25 Amp battery charger
• 1x engine battery – new 2019
• 3x 110 Ah domestic batteries – new 2017 & 2019
• NASA BM-1 Bluetooth battery monitor
• Steca Solsum solar charge controller
• 32W flexible solar panel
WATER SYSTEMS:
• 2x water tanks totalling approx. 430 litres
• Topargee inline water usage monitor
• calorifier - 240V immersion heater
• Jabsco ParMax Plus water pump
• Jabsco shower drain pump
• cold water cockpit shower
• DZR (Corrosion Resistant) brass seacocks – new 2020
DECK:
• 35lb (16kg) Delta anchor with 50 meters of 10mm chain
• Lofrans Airon 1000W electric anchor windlass
• pulpit with dolphin nose and spinnaker fitting
• 6x aluminium deck cleats
• aluminium toe rails with fairleads
• stainless steel stanchions and guardwires with side gates on both sides
• adjustable genoa car system
• 2x cockpit Lewmar 40 self-tailing winches
• 2x coachroof Lewmar 30 self-tailing winches
• 4x deck hatches
• 7x opening portlights
• 3x fixed portlights
COCKPIT:
• teak to cockpit sole and seats
• 4x buoyant double seat cushions
• 2x cockpit lockers (one very large) with latches and padlock fittings
• 2x lazarette lockers - one for gas bottles
• 2x removable teak cockpit tables (small and large)
• removable teak cup holder
• full cockpit tent/enclosure
• sprayhood
• bimini and dodgers
• acrylic sliding hatch and washboard
• steering wheel pedestal with compass, instruments and engine controls
• cockpit light and 12V outlet
• Whitlock/Lewmar constellation chain and cable wheel system
• helmsman's seat - lifts for access to transom
• stainless steel swim ladder
• cockpit shower (cold water only)
• stainless steel life raft bracket on transom
• plastic outboard motor bracket on pushpit
MISCELLANEOUS:
• fenders and mooring warps
• engine spares
• UK paper charts
NAVIGATION AND COMMUNICATION:
• Raymarine Evolution autopilot
• Raymarine a75 chartplotter (SD card with Navionics UK charts)
• Raymarine i70 instrument displays (2x)
• Raymarine p70 pilot controller
• Raymarine AIS650 transceiver
• SeaTalk NG backbone
• Plastimo Contest compass
• Simrad NSPL-400 AIS/VHF antenna splitter
• Simrad RS35 AIS DSC VHF radio at chart table with speakers in the saloon
• B&G H50 DSC VHF wireless radio handset with charging point at the helm
Engine make & model: Yanmar 3GM30F diesel engine – last serviced in November 2021
Engine power: 29 HP
Engine hours: 1104
Drive type: shaft drive
Propeller type: fixed 3 blade
SAILS & RIGGING:
• Vectran fully battened mainsail by Sabre Sails
• Vectran genoa by Sabre Sails
• Z-spars silver anodised aluminium mast with double in-line spreaders
• Tides Marine Track&Slide low friction mainsail handling
• single line slab reefing - all running back to the cockpit
• Z-spars silver anodised boom with rigid vang/kicker
• stainless steel standing rigging – replaced 2015
• running rigging – mostly replaced with Dyneema
• forestay fitted with Selden 204s headsail furling system – new 2021
• Profurl Spinex 1.5 continuous line furler for the cruising chute
• lazy jacks and stack pack
SAFETY:
• Seago 4-person liferaft
• Ocean Safety RescueMe EPIRB1– new 2019
• 2x jackstays
• horseshoe set with flashing light
• inflatable Horseshoe Lifebuoy and Jonbuoy Danbuoy
• MOB recovery sling
• 12V electric bilge pump with float switch – new 2021
• manual bilge pump in cockpit
• emergency tiller
• radar reflector fixed to mast
• CO alarm
• gas alarm
• smoke alarm
• fire blanket
• 2x 1 kg powder fire extinguishers
• 1x 2 kg powder fire extinguisher
• 1x automatic engine compartment fire extinguisher
Note: Indicated location is approximate general area only.